Volkswagen Key Programming Tips
Volkswagen provides a convenient method to add a spare key or replace one that is no longer working. It's a simple process and inexpensive with some tips.
First, obtain the correct key fob. It should have a keyblade that is able to be turned upside down or inside the keyfob. Collect all the necessary documentation to prove ownership. Then, go to the locksmith or dealer.
Immobilizer
The immobilizer feature is an anti-theft feature that stops keys that are damaged or not authorized from starting the car. The system detects a particular chip on each key. A VW dealer or locksmith for automobiles can program additional keys, but this process requires specialized software and tools. Using the right tools will ensure a smooth experience when programming. Before beginning the key programming, technicians should replicate the issue in order to pinpoint the problem. They should also look for fault codes on the vehicle, search for technical bulletins (TSBs) and test the battery in the key fob.
Volkswagen keys that are not programmed with immobilizer chips shut down the engine after a couple of minutes of cranking. It doesn't prevent the alarm from sounding or unlocking doors. The key fob's immobilizer an independent component that is glued into the flip portion of the car key. It must be programmed to the computer in the vehicle to function.
It's more expensive add the new VW key than to create duplicates when all of the originals have been lost. The key has to be purchased from the manufacturer, then it is subject to an specialized programing process in order to make it compatible with the computer in the car. volkswagen beetle key replacement can be done with the help of an expert and a computer tool like VagTacho or VCDS. This process is recommended for cars with the older Immobilizer 2, and earlier.
Electronic Ignition
Electronic ignition on a key is a crucial component of a car's anti-theft feature. The feature is activated when the key fob is inserted in the ignition. It's not a perfect system however. It can be prone to failure, which can lead to the engine of your VW not starting. This can happen due to a variety of reasons, such as faulty key programming or a damaged car battery.
This issue can be avoided when you have your Volkswagen car key fobs programmed professionally. This can be done by a dealer, or a locksmith. The costs for this service are different and are typically between $90 and $150. Furthermore, the prices vary based on the year and model of your car.
You'll need your main key to program the new VW key fob. The new key should be able start the vehicle. The onboard diagnostics will then recognize it as genuine keys. The immobilizer light will then turn off.
Certain models require a PIN code of three or four digits to enable the onboard key programming. Others may require a specific scan tool to do so. Locksmiths or dealers can make use of a specialized scanner to perform onboard key programming. These scanners aren't sold in the car accessory stores. You'll have to purchase one from an authorized dealer or borrow one.
Keyless Entry
If your Volkswagen key fob is suffering from battery issues, or you've lost it altogether, it's likely that the car will start, but isn't able to unlock. Fortunately, it's simple to fix the issue. First, make sure that the key fob can be recognized by the vehicle. If so, press the button to lock for a period of six seconds until lights flash on the key.
This will reset the key fob's proximity to your VW. After this you are able to unlock your vehicle by pressing the unlock button on the key fob again. If the vehicle still won't unlock, you'll need make contact with a dealer in order to have the key programmed.
The process of getting a new Volkswagen key programmed can be expensive. You should get estimates from a variety of dealers prior to selecting the one that is right for you. You should determine if the dealer will charge you for both the key and programming.
The purchase of a second Volkswagen key is a great idea for a variety of reasons. You may need an additional key in the event theft or you might lose your primary key. Here are a few easy steps to follow if you've got a spare Volkswagen key and want to program it to work with your Volkswagen.
Remote Start
Volkswagen's remote-start systems differ from previous generations of key fobs which communicated via radio waves. Instead they connect to your car using a secure wireless connection using the cellular technology. This means that your VW Atlas, Jetta, or Passat will be able to tell that you're within range, and activate its features such as keyless entry or push button start. It's as simple as opening the app and connecting your phone to your car and pressing the button.
Before you attempt this check that your Volkswagen is parked and that the driver's door is shut. This will ensure that only the proper key is used to access your vehicle's features. The dashboard will display an error when the key isn't recognized. This method is only compatible with newer VW models that have an RFID sensor ring mounted on the steering wheel. These models require the secret pin be programmed.
Close the driver's side doors and take out the main key to create a new keyfob. Press the lock button of the new keyfob. This will alert the vehicle that it is a functioning key. The key will start transmitting signals to enable you to open your driver's side door and start your vehicle remotely. Some say it only works when there is clear sight of the car. Others report success even in parking lots that are crowded.